Not FoundBasic tools for this assembly are a 3/8 allen wrench, a threaded insert and a hanger bolt and crescent wrench.


Not FoundDrill a 3/8 hole in the bottom of your furniture piece.


Not FoundScrew the threaded insert into the bottom of your piece using the allen wrench.


Not FoundDrill a ¼ hole in the top of the bun foot using a drill press or being careful to be sure hole is 90 degrees to wood surface.


Not FoundAttach the hanger bolt to the bun foot using a crescent wrench. In this picture a nut has been tightened against a seccond so that when they are tightened, the hanger bolt is driven into the bun foot.


Not FoundSimply screw the bun foot into the bottom of your piece.