Some people
say that the bracket is stronger at the top, others say at the bottom
or the middle. Here we have it centered. You can use what you prefer,
making sure that the hanger bolt will still go through the hole
in the center of the bracket.
While you screw the bracket onto the skirt, keep the lip tight
against the inside of the kirf (groove). This will make the skirts
stay square with the leg.
When you
have both skirts screwed on, it will look like this.
If you attach the leg on top of a tabletop as
shown, the top of the leg will automatically line up with the
top of the skirt.
Put the
washer on the hanger bolt, and then screw on the nut.
Bookmark
