Furniture Feet Services

At Osborne Wood Products, all Standard Cabinet and Furniture feet will come unfinished and without any cuts or hardware. In order to make your project easier, Osborne offers services specifically for Cabinet and Furniture Feet that can be added to your order.

Please note that all orders with any of the following services added will be considered ‘Custom‘ and are not eligible for return.

You will need to order your products with these services through our Customer Service Department by calling 1-800-849-8876. Services cannot be done online.

Services for Cabinet and Furniture Feet:

Sanding, Millwork and More:

Sandingto 220 Grit– Our products are sanded to150 grit as a standard. If you need your items sanded to 220 grit, we can do that foryou as well. This additional sanding can only be done on Turnings made In House. Please check with ourcustomer service representatives to make sure your items are eligible for thisservice. There is a $8.00 per item service charge on 220 Grit Sanding.

NoSanding– We can ship an item without anysanding. The item must be manufactured In House. There is no additional charge for this service. Pleasecheck with our customer service representatives to make sure your items areeligible for this service.

HandSelect– We can hand select from in stockitems for specific traits. An example of this would be hand selecting a knottypine leg for the greatest number of knots, or hand selecting a soft maple legfor the least amount of color variation. There is a $5.00 fee per itemfor this service. This service only applies to items that are currently instock. Please check with our customer service representatives to make sure youritems are eligible for this service.

HandSelect from Raw Material – On items madein house that are not in stock we can hand select the raw lumber for specifictraits. An example of this would be handselecting a knotty pine leg for the greatest number of knots, or hand selectinga soft maple leg for the least amount of color variation. There is a$10.00 fee per item for this service. This service only applies to items thatare currently out of stock and are made InHouse. Please check with our customer service representatives to make sureyour items are eligible for this service.

SolidStock Only– You may requestthat only solids be sent for an item when they are available instock. Items over 3.5″ wide are almost impossible to get as solids, asthey tend to crack easily. Some wood types it is hard to get in solidsunder 3.5″ wide as well, so if it is not in stock our customer servicerepresentatives may need to check with production before putting this servicein. The fee for this is $5.00 per item.

ExteriorGlue– Although we do not recommend our products for exterioruse you may request exterior glue be used in the production of yourproducts. The items must be manufactured In House. There is a $6.00 per item service charge for usingexterior glue. Please check with our customer service representatives to makesure your items are eligible for this service.

DrillHole– We are able to drill a hole (lessthan 3 ¾” deep) of varyingdiameters for hardware. The hole may bedrilled on the top or bottom of the item and will be no deeper than 3 ¾”. The service charge is $1.50 per hole drilled.

CustomMilling– Do you have a milling need notmentioned in this section? Contact our friendly customer servicerepresentatives for a quote to meet your milling needs. 1-800-849-8876

Installation:

InstallBolt/Screw– Our Screw Dowels (Part 910HWor 916HW), or Hanger Bolts (Parts 920HW, 925HW, or 930HW) can all be installedin your product. Hardware will be installed in the top or bottom center of theproduct. There is an install charge of $1.75 per hardware installed plus thecost of the hardware.

CustomInstall Hardware– Can’t find theinstallation you need for your product? Request a custom install with ourfriendly customer service staff at 1-800-849-8876. Prices will vary dependingon service.

Please feel free to take full advantage of the services listed above! Our customer service representatives are standing by, and will assist you in determining exactly what you need in order to successfully complete your project.

If there is a custom service required, but it is not included on this list, please call us! We would love to check the available options for you in order to help meet your woodworking needs.

Our friendly staff is on the line from 8am to 7pm EST ready to assist you. Please call 1-800-849-8876 to speak with a representative today.