Cart (0 items)
X Discounts

Tapered (2-sided) Kitchen Island Leg (34 12″ x 3 12″)

34 12″ x 3 12 Part #1482 Tapered (2-sided) Kitchen Island Leg
Material Price Each Quantity

Traditional Selection

•  Soft Maple (paintgrade) $40.84  ea
•  Red Oak $60.68  ea
•  Knotty Pine $35.53  ea
•  Cherry $81.65  ea

Premium Selection

•  Hickory $72.39  ea
•  Alder $73.49  ea
•  Hard Maple $68.72  ea
•  Mahogany $98.10  ea
•  Black Walnut $114.38  ea
•  White Oak $123.79  ea
•  Beech $137.43  ea

Specialty Wood Selection

•  Rustic Alder $112.07  ea
•  Western Red Cedar $229.51  ea
•  Spanish Cedar $137.43  ea

Select Desired Product Service(s)
Product Price will adjust upon selection

25 %

Can't find what you're looking for? Contact Us + More

The two sided tapered Island leg is a very popular leg in modern and contemporary design. It is a simple straight style with clean vertical lines. It is an alternative to the 4 sided taper, the only difference is it only tapers on two adjacent sides instead of all four sides of the leg, with eight inches of top square, there is plenty of room to allow for an apron to be used with this leg.

Typically, the two sided tapered leg is installed so that the tapers are on the inside leaving clean straight lines from the countertop down. This leg works well with any type of countertop from granite to stainless steel, the simplicity of the leg does not overwhelm the space.

This leg is available in 20 different wood types and can be custom made in just about any other wood type. With all these wood types there are endless possibilities to achieve the desired look.

Osborne can make a table base kit for you using this leg, and can ship it out by the following business day of your order. Just click “Order a Table Apron with this Leg” (just below the Add to Cart button), and you will see how we produce our high quality table base kits—everything but the table top! Each piece is made to your exact specifications, and includes all the hardware you need to put together a beautiful table base. You select the length, width, overhang, profile edge and wood type, and we do all the milling to your specifications, and in just one day!
We offer a wide range of services for most products which are not available online, but can be added to your order by calling our friendly Customer Service representatives at 800 849 8876. 
Please note that all orders with any of the following services added will be considered ‘Custom‘ and are not eligible for return. 
For a complete description of each of these services, click this link:
Sanding to 220 Grit
Hand Select
Solid Stock Only
No Sanding
Exterior Glue
Perfect Quarters
¾ Notch Specific Height
¾ Notch Specific Angle
Trim Leg
Install Bolt/Screw
Chamfer and Drill Hole
Install Bolt/Screw in Chamfer
Install Bolt/Screw in Chamfer
Square Hole Through Product
Round Hole Through Product
Receptacle Notch
Drill Hole
Shelf Notch
Custom Mortise
Bullnose Edges
Custom Milling– Do you have a milling need not mentioned in this section? Contact our friendly customer service representatives for a quote to meet your milling needs. 1-800-849-8876