OsBlog

March 24, 2009

New Product Development - Feedback Appreciated!!

Filed under: New Item Ideas — Melody @ 8:54 am

Lately, there has been a great deal in the works here at Osborne Wood Products.  Most recently, we have begun going through the product development process with two new product ideas.

One idea is to start producing shelves with our corbels.  More than just your basic pre-fab shelves, these shelves are a little more high-end.  Pairing various moldings with matching corbels, we have found that there are myriad possibilities for designing stylish shelves with quality wood components.

The following pictures are of some prototypes of these shelves, and we would greatly appreciate any feedback on what you would or would not like to see.  Any insight you have as to the length and depth of the shelves (for instance - what are three standard sizes you would like to see?), what style of corbel / molding you think would be most popular, and what three wood types you think would be must-haves.

corbel-shelves-006b.jpg

The above picture is a small shelf with our Milan Corbel with Basket Weave (part 8174).  We will picture this corbel with three different moldings.  The molding pictured here is our Rope Half Dowel Molding (7207.36).

corbel-shelves-008b.jpg
Here is the same shelf, pictured with the Large Basket Weave Carved Molding (7413.96).

corbel-shelves-012b.jpg

And then finally with the Reeded Half Dowel Molding (7205.36).

The next shelf has a sleeker, lighter look, and uses our Little Rock Contemporary Beaded Wood Brackets (part 80041):

corbel-shelves-007b.jpg

You can note that the shelf here also has two beaded edges, so a shelf styled like this is a natural fit for our contemporary brackets with the beaded edge option.

This final shelf example is rather large.  Measuring 60 inches long and about 10 inches deep, with a height of about 6 inches.  The shelf is actually hollow, allowing for an impressive construction without a great deal of structural concern (and also reducing the shipping cost greatly, although it still weighs in at about 80 lbs).  Pictured immediately below, we paired it with the Grape Vine Molding, (7422.96), and following that it is shown with our Carved Grape Molding, (7412.96).  The corbels used are the Ancona Corbels with Grapes (8227).

corbel-shelves-005b.jpg

corbel-shelves-010b.jpg
Other thoughts of how to use these shelves include adding a dowel between the corbels for hanging tapestries, or also adding a backboard to the smaller shelves for the installation of coat hooks.  Your feedback is more than welcome, please share with us any insights you may have!

Thank you!

(Coming Soon: New Product Idea #2 - Cold Cast Metal Corbels.)

March 10, 2009

Recycling at Osborne - Lean and Green

Filed under: Green — Melody @ 7:38 am

Recycling is one of the many ways that we can do more to protect our planet.  Recycling turns previously “end use” products into a renewable resource, allowing fewer items to clutter up landfills – and, in some cases, taint groundwater supplies – by redefining what items are regarded as waste.  Recycling is very familiar to many of us in the form of paper, plastic, and glass; but it is possible to go further still in our efforts to minimize our waste and take good care of the earth.  Cell phones, batteries, ink cartridges; all of these are recyclable, too.

At Osborne Wood Products, Inc., we are continually looking for better ways to handle what would otherwise be considered “waste.”  In addition to having bins available for employees to recycle newspaper, glass and plastic bottles, and aluminum cans; we also recycle all of our metal tooling.  When tools get too short for use on the lathe and nuts and bolts get stripped out, we have a location set aside for their collection to be recycled.  This also includes band saw blades (when they become unusable), the metal banding from lumber shipments, and any other scrap metal we might encounter.

In addition to this, all of the cardboard from any shipments received is either reused or recycled.  Also along the lines of paper products, we use shredded paper from a few local businesses as packing material.  Our sawdust is currently being brought to chicken farms to be used in the chicken houses.  Although sawdust is biodegradable, it is good to reuse products, getting as many uses as are possible out of a single item reduces waste, and consequently lessens the negative impact on the environment.

Finally, we have recently begun to take advantage of another corporate recycling program.  A Home Depot store has recently opened in our town, and they have a battery recycling program.  The heavy metals and acid found in batteries can be very detrimental to the environment; tainting groundwater supplies and soil.  Now that there is a local collection point, we can collect any dead batteries around our plant, and bring those to Home Depot to recycle.

There are many views on just how dire the situation with the environment is, but regardless of a person’s thoughts on what might just be “hype” and what is a genuine problem, all can agree that we need to make the best use we possibly can out of whatever resources we have.  Producing less waste and being more careful with what resources we have ensures that we always have the healthiest planet we can, and the most abundant resources to work from.  To reiterate a previously mentioned point from our discussion on Lean Management, the old adage says, “Waste not, want not;” and that is a principle that we are continuously striving to implement.

Powered by WordPress