Corbel & Bracket Services
At Osborne Wood Products, all Standard Corbels and Brackets will come unfinished and without any hardware. In order to make your project easier, Osborne offers services specifically for Corbels and Brackets that can be added to your order.
Please note that all orders with any of the following services added will be considered ‘Custom‘ and are not eligible for return.
You will need to order your products with these services through our Customer Service Department by calling 1-800-849-8876. Services cannot be done online.
Services for Corbels & Brackets:
Sanding, Millwork and More:
Sanding to 220 Grit– Our products are sanded to150 grit as a standard. If you need your items sanded to 220 grit, we can do that for you as well. This additional sanding can only be done on Turnings made In House. Please check with our customer service representatives to make sure your items are eligible for this service. There is a $8.00 per item service charge on 220 Grit Sanding.
No Sanding– We can ship an item without any sanding. The item must be manufactured In House. There is no additional charge for this service. Please check with our customer service representatives to make sure your items are eligible for this service.
Hand Select– We can hand select from in stock items for specific traits. An example of this would be hand selecting a knotty pine leg for the greatest number of knots, or hand selecting a soft maple leg for the least amount of color variation. There is a $5.00 fee per item for this service. This service only applies to items that are currently in stock. Please check with our customer service representatives to make sure your items are eligible for this service.
Hand Select from Raw Material – On items made in house that are not in stock we can hand select the raw lumber for specific traits. An example of this would be hand selecting a knotty pine leg for the greatest number of knots, or hand selecting a soft maple leg for the least amount of color variation. There is a$10.00 fee per item for this service. This service only applies to items that are currently out of stock and are made In House. Please check with our customer service representatives to make sure your items are eligible for this service.
Exterior Glue– Although we do not recommend our products for exterior use you may request exterior glue be used in the production of your products. The items must be manufactured In House. There is a $6.00 per item service charge for using exterior glue. Please check with our customer service representatives to make sure your items are eligible for this service.
Horizontal Keyhole– Cut a single horizontal wood keyhole in the back of a corbel. The fee for this is $7.00.
Custom Milling– Do you have a milling need not mentioned in this section? Contact our friendly customer service representatives for a quote to meet your milling needs. 1-800-849-8876
Installation:
Industrial Hanger Installation– Our corbels come standard with keyhole brackets for hanging. However, for some projects a stronger method of installation may be needed. For this reason, Osborne offers Industrial Hanger installation services. Our industrial hangers are part #955HW. For corbels with a back surface less than 11” one hanger is used. For a surface greater than 11” two hangers would be installed. The installation service charge is $10.00 per hanger, plus the cost of the hanger (Part 955HW).
Install Metal Keyhole Bracket– Corbels may be used in various projects. For some projects, you may need to flip the corbel and have keyhole brackets on what would originally be the top of the corbel. We can add keyhole brackets to the top of the corbel for you to assist you in completing your design. One to two brackets will be needed (depending on the depth of the corbel). The rule of thumb is that 1 bracket is used for corbels with a depth less than 8”. For a depth greater than 8”, two keyhole brackets will need to be installed. The cost is $5.00 per bracket.
Horizontal Keyhole – If a horizontal keyhole would be needed to install your corbels, we can cut a horizontal wooden keyhole in the back of the product. The back of the corbel must be at least 2 ¼” wide where the keyhole would be cut. The rule of thumb is that 1 keyhole is used for corbels with a depth less than 8”. For a depth greater than 8”, two keyholes will need to be cut. The cost is $7.00per keyhole.
Custom Install Hardware– Can’t find the installation you need for your product? Request a custom install with our friendly customer service staff at 1-800-849-8876. Prices will vary depending on service.
Please feel free to take full advantage of the services listed above! Our customer service representatives are standing by, and will assist you in determining exactly what you need in order to successfully complete your project.
If there is a custom service required, but it is not included on this list, please call us! We would love to check the available options for you in order to help meet your woodworking needs.
Our friendly staff is on the line from 8am to 7pm EST ready to assist you. Please call 1-800-849-8876 to speak with a representative today.