Osborne Builder's Studio: DIY Coffee and End Table Kits
Osborne's Full Table Kits are easy to assemble and available in multiple design styles. These DIY table kits come with everything you need to build a fully functional dining, coffee, or end table for your space! Assembly is a breeze thanks to Osborne's pre-cut mortise and tenon joinery. Simply attach the skirt boards to the legs and attach the table base to the wooden top!
Products used in this video:
- Mission Style Coffee Table Kit (Part #50019)
- Mission Style End Table Kit (Part #50022)
Assembly Instructions
Overall Dimensions:
Coffee Table: 19" × 24" × 46"
End Table: 21 ¾" × 16" × 20"
What we used:
Mission Style Coffee Table Kit (Part #50019)
Mission Style End Table Kit (Part #50022)
Note: Each kit comes with a table base, table top, and the necessary installation hardware. Wood glue is optional but not required for assembly.
Other items needed:
Drill
Wood glue
½” wrench
Ruler/tape measure
Instructions:
Step 1
To begin, assemble the two longest rails in the kit using the pre-cut mortise and tenon joinery. Apply glue to the mortise and tenon joinery on the long skirt boards (optional). Screw the table legs and skirt boards together, utilizing the pre-cut pocket holes and supplied screws.
Step 2
Once the longer halves of the table base have been assembled, connect them together using the two shorter skirt boards. Connect the two halves using a screw into the pre-installed pocket holes.
Step 3
Install the corner blocks by adding the provided bolt and washer into the pre-installed threaded insert of the corner block. This adds greater stability to the table kit.
Step 4
Take a ½” wrench and snug the bolt down. Make sure not to over tighten it.
Step 5
Secure the corner blocks by installing the supplied screws into the pre-drilled holes in the corner block.
Step 6
Place the table top upside down to center the base and measure for the proper overhang.
Step 7
Add screws into the pre-installed pocket holes to secure the table top to the table base.
