Builder's Studio: DIY Pub-Style Table
In this exciting episode of the Builder's Studio, Sara demonstrates how easy it is to create a DIY pub-style table with Osborne components! We paired one of most intriguing legs with a stunning plank table kit for a unique result that will leave your guests in awe. Build your own dining table or kitchen island today by grabbing your preferred table leg, a custom table base kit and a table top. We even have full table kits available that already include the components you need to build a complete table. Regardless of the components you choose, we look forward to seeing you build something beautiful!
Parts used in this video:
- Hemsworth Island Leg (Part #140268)
- Square Rustic Plank Table Kit (Part #5915)
- Custom Table Base Kit
Assembly Instructions
Overall Dimensions: 36” x 36” x 35 ½”
Materials Used:
Hemsworth Island Leg (Part #140268)
Square Rustic Plank Table Kit (Part #5915)
Tools Needed:
|
|
Instructions:
To begin, we will start by assembling your table base kit. A full instructional on this process is referenced below.
- Before assembling the table top, arrange the boards so that they are spread out evenly with a mixture of wider and skinnier boards.
Double check that your dowel holes line up and that the pocket holes are not overlapping.
Also make sure that the outside boards are on the outside of your build, (the end pieces will only have dowel holes on one side).
Once you have everything placed where you would like it, begin inserting the dowels, using glue if desired.
Next screw the panels together using the included screws and pocket holes.
- This particular table top kit was designed to have a 3” overhang, so measure and make marks so you can keep the table base centered.
Your overhang is measured from the edge of the top block of your table leg to the outside edge of your table top.
Finally, once everything is squared up, go ahead and screw down your base to the bottom of your table top. The table is now ready for finishing!