Osborne Builder's Studio: Shaker Table Base Assembly
In this episode of Builder's Studio, Sara demonstrates how to assemble the stunning Shaker Table Base Kit from Osborne Wood Products. This wooden table base was built with strength, stability and simplicity in mind. It has a timeless profile that complements anything from rustic to contemporary homes. This base is easy to put together making it the perfect solution if you are interested in giving an existing upgrade a quick upgrade or creating a unique new build.
Assembly Instructions
Included:
Two primary base pieces
4 corner blocks
Necessary screws
Other items needed:
Drill
Phillips Head Drill Bit
Step 1 - Lay the base pieces out
The two primary base pieces have adjustable floor levelers. When assembling, ensure they are on the bottom.
Step 2 - Fit pieces together
Stand the base piece with the precut gaps on a flat surface. Slide the other base piece through the gaps until they fit flush.
Step 3 - Drill the pieces together
Flip the base on its side. Drill the two pieces together, utilizing the pre-drilled holes.
Step 4 - Attach corner blocks to table top
Flip the table base upside down. Attach the 4 corner blocks to the top of the table, where the base meets the table top.
Step 5 - Attach corner blocks to table base
Screw the corner blocks to the table base. When assembling, ensure the pre-drilled pocket holes are facing the same directions as the levelers. Since there are no pre-drilled holes, make sure to measure that each corner block is level to each other.
