Cart (0 items)
X Discounts

Husky Dining Table Leg (29″ x 5″)

29″ x 5″ Part #1109 Husky Dining Table Leg
1109

enlargeEnlarge

Color Picker

1109A1  Alder
1109C  Cherry
1109HM  Hard Maple
1109H  Hickory
1109M  Soft Maple
1109O  Red Oak
1109P  Knotty Pine
1109W  Black Walnut

Material Price Each Quantity

Traditional Selection

•  Soft Maple (paintgrade) $80.10  ea
•  Red Oak $102.45  ea
•  Knotty Pine $56.00  ea
•  Cherry $151.98  ea

Premium Selection

•  Hickory $118.41  ea
•  Alder $92.66  ea
•  Hard Maple $112.00  ea
•  Mahogany $142.34  ea
•  Black Walnut $186.96  ea
•  White Oak $199.28  ea
•  Beech $223.99  ea

Specialty Wood Selection

•  Rustic Alder $187.10  ea
•  Tiger Maple $306.87  ea
•  Western Red Cedar $374.07  ea
•  Spanish Cedar $223.99  ea

Select Desired Product Service(s)
Product Price will adjust upon selection

   
$ 49.99

   
50 %

   
50 %

   
25 %

Can't find what you're looking for? Contact Us + More

Who would have guessed that one of the largest table leg designs from Osborne turned out to be one of the most popular? This Husky Dining Table leg defied the odds and become a go to design at Osborne Wood Products. At 5 inches wide, this piece truly lives up to its name. You do not need to worry about stability with this table leg!
 

The Husky Dining Table leg was styled after our popular Old English Country table leg. This table leg design features simple turnings for a real "down home" country style. This table leg has proven to flawlessly compliment rustic and country designs. Despite its "bulky" nature, the Husky Dining Table room can easily fill a space without overwhelming it. The flawless detailing allows design elements in the room to take center stage as the husky leg takes on a supporting role.

Build This Table. DIY Tutorial and Plans


The Husky Dining Table Leg was recently featured in a How-to Blog article by Ana White. This feature includes Step by Step instructions, cut list, and photos to guide you along the way. These easy instructions allow for creativity and a perfect final table design. View the full instructions now by clicking Here.

 

The Husky Dining Table Leg is a perfect option for your home. With over 18 wood types to choose from you cannot go wrong with this design. Whether you plan to stain the table legs to match your current cabinetry, furnishings, or decor, or you will be painting the table legs to contrast a natural wood top, the Husky table legs are the choice for your next table design!

 

 

See More Photos of this Leg in Application

 

You can add several services listed above for this table leg (Receptacle notch, Rectangularly Split Product, Quarter-Notching and Weather Wood Distressing).

In addition, we offer a wide range of additional services for this product which are not available online, but can be added to your order by calling our friendly Customer Service representatives at 800 849 8876.

 

Please note that all orders with any of the following services added will be considered ‘Custom‘ and are not eligible for return.

 

AVAILABLE SERVICES:

Sanding to 220 Grit– Our products are sanded to 150 grit as a standard. If you need your items sanded to 220 grit we can do that for you as well. This additional sanding can only be done on Turnings made In House. Please check with our customer service representatives to make sure your items are eligible for this service. There is a $4.00 per item service charge on 220 Grit Sanding.

No Sanding– We can ship an item without any sanding. The item must be manufactured In Houseand there is no additional charge for this service.

Hand Select– We can hand-select from in-stock items for specific traits; for example, legs with the least/most amount of knots in knotty pine, or soft maple items with the least color variation, or the least amount of sapwood (for cherry/hickory).  There is a $5.00 fee per item for this service. If we have no in-stock items available, we can hand-select from the available turning blanks for specific traits. Because the quantity of available turning blanks is typically larger than in-stock items, the hand-select fee would be $10.00 per item.

Solid Stock Only– You may request that only solids be sent for an item when they are available in stock.  Items over 3.5″ wide are almost impossible to get as solids, as they tend to crack easily.  Wood types that are usually available for solids-only items are Hard Maple, Soft Maple, Cherry, Red Oak, and Knotty Pine. The fee for this is $5.00 per item.

Exterior Glue– Although we do not recommend our products for exterior use you may request exterior glue be used in the production of your products. The items must be manufactured In House. There is a $6.00 per item service charge for using exterior glue.

Quarters– A turning may be sent as quarters (all four quarters sent). The item must be symmetrical in order for the product to be eligible for this service. Note: Quarters does allow for the width of the saw blade and are not “Perfect Quarters.”

Perfect Quarters– We can ship two Perfect Quarters with this service. Again, the product must be symmetrical in order for this service to be applied. Contact customer service for pricing.

¾ Notch Specific Height– Are you adding a turning to a counter or shelf? A height specific ¾ Notch is a custom notching that begins at the top or bottom of the product, and continues for a specified length. The turning must be able to accept millwork to be eligible for this service. Pricing will vary depending on specifications. Contact our customer service representatives for pricing details.

¾ Notch Specific Angle– An angle specific ¾ notch is specified to the desired angle between 45 and 175 degrees (in increments of 5 degrees). Item must be able to accept millwork to be eligible for this service. Pricing will vary depending on turning used. Contact customer service for more pricing details.

Trim Leg– If you have a specific leg style in mind but need it a little shorter we can make this happen without a custom! Trimming is $7.50 per cut per leg. Cuts can be made at the top and/or bottom of the turning.

Install Bolt/Screw– Our Screw Dowels (Part 910HW), or Hanger Bolts (Parts 920HW, 925HW, or 930HW) can all be installed in your product. Hardware will be installed in the top or bottom center of the product. There is an install charge of $1.75 per hardware installed plus the cost of the hardware.

Chamfer– Our chamfer service is done to the top square of the leg, and is approximately 3/4 inch wide. You can specify the length/width of the chamfer. This service can be done if the top square will accommodate the specified dimensions, and costs $2.00 per leg.

Chamfer and Drill Hole– Osborne is also able to Chamfer and drill a hole in the chamfer for your hanger bolt. The width of the chamfer will be .5 or 1 inch depending on leg size. (Length is specified by the customer). The Diameter of the hole may be .125, .25, .375, .5, .625, or .75 inches. The customer may also specify the distance from the top of the leg. Chamfer and drill hole services are $4.00 per leg. (This service will be used if you have your own hardware to install. See Chamfer and Install Bolt/Screw under Installation for pricing of Chamfer with our hardware installed)

Install Bolt/Screw in Chamfer- Hardware may also be installed in a chamfer. The chamfer will be .5 or 1 inch depending on the size of the leg, with a specified length. Then, the hardware of your choice will be installed at a designated height in the chamfer. Our standard chamfer with bolt installed is .5 (or 1 inch), with a 4 inch length (chamfer). We install part 920HW 2 inches from the top of the leg. This service charge (standard or customer specific) is $5.00 per item.

Install Bolt/Screw in Chamfer- Hardware may also be installed in a chamfer. The chamfer will be .5 or 1 inch depending on the size of the leg, with a specified length. Then, the hardware of your choice will be installed at a designated height in the chamfer. Our standard chamfer with bolt installed is .5 (or 1 inch), with a 4 inch length (chamfer). We install part 920HW 2 inches from the top of the leg. This service charge (standard or customer specific) is $5.00 per item.

Square Hole Through Product– Items manufactured In House may have a square hole through the center of the product. The hole will vary in size (depending largely upon the size of the product and equipment used). This service is $35.00 per leg.

Round Hole Through Product– We can drill a 1” round hole through the center of the product, creating a hole that continues all the way from the top to the bottom of the leg. This service is $35.00 per leg.

Receptacle Notch– Our receptacle notch service is for the following size: Receptacle notch is cut 5/8” from top, 4” long, 2.5” wide, and 2.25” deep. The item must have a top square in order to be eligible for this service, as the notch will be centered in square. Specifications other than these listed may be done as custom millwork. Contact customer service for availability of other options. The price of our standard receptacle notch is $35.00.

Drill Hole– We are able to drill a hole (less than 3” deep) of several diameters for hardware. Drilled holes can have a diameter of .125, .25, .375, .5, .625, or .75. The hole may be drilled on the top or bottom of the item and will be no deeper than 3”. The service charge is $1.50 per hole drilled.

Shelf Notch– A shelf notch can be added to the bottom of one of our products. The notch will meet your specification of distance from floor and thickness of the notch. Service charge is $35.00 per notch.

Mortise– Legs can be mortised on the top or bottom square of the product. The mortise may apply to 1,2,3 or 4 corners (if 2- opposite or adjacent). Our standard mortise is 3 1/16 long x 5/16 wide x ¾ deep. Items must have a top or bottom square in order to accept the mortise. A $10.00 service charge per leg will apply.

Custom Mortise– If your item requires a mortise that does not match our standard mortise service you may call our customer service to request a price quote for a custom mortise.

Bullnose Edges– Bullnose edges can be added to our products that have a top or bottom square. The item can have this service done to 1,2,3, or 4 corners (if 2- adjacent or opposite) on the top or bottom of the product. Radius of the bullnose edge can be .25, .5, or 1 inch. Service charge is $5.00 per edge.

Custom Milling– Do you have a milling need not mentioned in this section? Contact our friendly customer service representatives for a quote to meet your milling needs. 1-800-849-8876

Build This Table. Free Plans and Cut List