SOLD AS A SET OF SIXTEEN~Figure Eight Fasteners (Screws Not Included)
Save 5% when ordering 24 or more pieces of the same product
Save 10% when ordering 50 or more pieces of the same product
Save 20% when ordering 100 or more pieces of the same product
*Discounted pricing reflected in cart
*All wood components are unfinished. Learn more about wood types or request a quote.
SOLD AS A SET OF SIXTEEN
Figure Eight Fasteners are an alternative to pocket holes when completing a table assembly. While pocket holes are valid methods of table attachment, these fasteners allow for movement of the tabletop for those expecting possible expansion. This slight movement can prevent splitting, cracking or warping as the wood changes due to the climate surrounding it.
These fasteners are shaped like a figure eight and include holes on either end for screws (not included - it is recommend to use #6 flat head screws for this assembly). The fastener is 1 5/16" long and 3/4" wide at the largest diameter. To install, you will need a 3/4" Forstner bit to create a flat bottomed recess where the fastener will be attached. Be sure to set your depth to be slightly deeper than the thickness of the fastener (1/8") so that movement remains possible.
For a full demonstration on utilizing this hardware, watch our informational video below.
1" × 7 3/8" × 3 1/2"
SOLD AS A SET OF FOUR~Corner Blocks for 4" Wide Legs